Overall, the linksys wrt 54 g was great, and I have no problem recommending linksys wrt 54 g for anyone wanting one. LOVE THIS linksys wrt 54 g
Help answer the question about linksys wrt 54 g
New router or wireless expander?
The wireless signal is not strong enough on my third floor. About 25% on my Playstation 3(not enough to get online). Should I buy linksys wrt 54 g a signal booster(expander) or is there a new router that would give me greater or equal signal on my third floor? If so what model? If not what signal booster should I get? I have the the Linksys WRT 54 G version 2 router. I was recommded the WAP 54G and the WRE 54G. I am not sure if the WAP 54G is the right product.
In this how you can information I can be showing you ways create a wireless bridge between a Linksys 160n wi-fi router and a Linksys WRT54GS wi-fi router that has been modded with the DD-WRT firmware. You would possibly ask yourself what is a wireless bridge.You additionally could ask your self why you'd need to create a wireless bridge within the first place. Properly a wi-fi bridge is when you connect one router to another router without utilizing any arduous wired cables. Chances are you'll need to create a wi-fi bridge for among the following reasons.
Laptop are located at different ends of your house and you can't run a ethernet cable between the two router. You wish to hyperlink to you neighbors community so you'll be able to share internet service, files, and media corresponding to music and movies. The probabilities are infinite in relation to networking routers together using wireless.
For the wireless bridge setup I shall be utilizing the next ip deal with and subnet setup:
* Wi-fi Router 1 = Linksys WRT160n 192.168.1.0/24
* Wireless Router 2 = Linksys WRT54GS-WRT mod 10.0.1.0/24
The Linksys WRT 160n wireless router might be immediately related to the Web service, linksys wrt 54 g and the Linksys WRT54GS DD-WRT modded router will create the wi-fi link between the 2 routers. One of the best ways to setup your wireless bridge is to have a computer that has both a wifi connection and a ethernet connection. To start out the installation, use your wi-fi connection to connect with router 1, which is the Linksys WRT160N. After you have got connected the router, open your internet browser and sort within the default gateway which should be 192.168.1.1. Click on the Standing Tab and be sure that router 1 has a web connection.
After you recognize that the first router has a web connection, go to the Wireless Safety Tab and setup the encryption sort and paraphrase key. Make sure that you are utilizing suitable encryption between each of the routers.linksys-wrt160n-wpa-wireless-safety
After you have got set the encryption kind and key on the primary router, disconnect from this router. Now hook up with the WRT54GS DD-WRT modded router, then go to the setup tab and change the native community to 10.0.1.0 or no matter community vary you prefer.
* Local Ip Address: 10.0.1.1
* Subnet Mask: 255.255.255.0
* Gateway: 10.0.1.1
* Local Dns: 10.0.1.1
After you might have modified the community setup in your modded DD-WRT router, disconnect from the router then reconnect to so that you simply receive your new ip address. Your new ip address should be someplace within the 10.0.1.0 network. Now open an online browser at point it towards 10.0.1.1, which is now the default gateway to your WRT54GS DD-WRT modded router.
Now go to the status tab and click on the wireless tab. Inside the wi-fi tab you should see a button that says web site survey. The location survey button is located in the direction of the bottom of the page. All it's important to do now could be choose router 1 from the listing, which should be the Linksys WRT160N.
After you have chosen router 1 from the list, go to the wireless tab and click on the wireless safety tab. All you must do now's input the very same encryption kind and key that you simply setup for router 1. After you have got set the encryption kind and key into ybur modded DD-WRT router, all you need to do is apply the settings. You need to now have a wireless link between the Linksys WRT160N and the Linksys WRT54GS. Now join utilizing a wi-fi connection to the DD-WRT modded router, and make sure your internet connection work.
Line Interact Important Fact
A software firewall will have outbound application filtering. It is your last line of defense, if say a trojan somehow gets into your machine and trys to “phone-home” to the attacker.A software firewall should alert you to this fact that a strange application is attempting to access the internet. _____________________________An excellent free and extremely strong firewall is Comodo Personal Firewall. It can pass firewall “leak tests” that even most of the “paid-for” firewalls cannot pass.And Comodo has a great support forum. Where the CEO / President of the company (Melih) might even himself answer your question! Check it out at:http://www.personalfirewall.comodo.com/————————————Or if you prefer a decent and free firewall that is extremely easy on using your computer’s system resources, then Kerio 2.1.5 is just about the lightest firewall there is. Uses about 4 MB RAM on my machine.Although it is no longer officially supported by the makers of Kerio, there is a great Kerio 2.1.5 support forum at http://www.dslreports.com/forum/kerioto help and guide you if you have any problems.2.1.5 is availible for free at:http://www.321download.com/LastFreeware/page7.html
Have you thought of a plug-in network adaptor.Like the Netgear PowerLine Wall-Plugged Ethernet Bridge – XE102.You should have a ethernet port in the back of your exsiting router and then a plug next to both the routor and the Playstation. The XE102 would give you about 14mbps quicker than the wireless connection and would be more secure. About £35If you were to start going though a second router it would all start geting very slow.