If you are seaching for information related to wrt54g2, this article will prove very helpful, to say the least. Even if your search is about other wrt54g2 information you have come to the right article.
Help answer the question about wrt54g2
I installed a new Linksys router (WRT54G2). Now, I can no longer access shared folders. What's wrong?
I am now prompted wrt54g2 for a username/password. This did not use to happen. When I attempt to plug in the username/password for the computer I'm trying to access, the dialog box repeatedly comes up as if the password is incorrect (trust me, it is not).
Line Interact Important Fact
try this website..friends at work told me about it, hope it helps ya out!http://www.dd-wrt.com/dd-wrtv3/index.php
Look in the manual that’s on the CD – it gives you step-by-step instructions.
The firmware upgrade was to the router or the DVD player?If it was to the DVD player, then Samsung is full of it.If it was the router, then I suggest doing a factory reset on the router.
Go into the routers settings and look for a QOS (quality of service) setting. QOS typically allows you to set a computer or network device to have a higher or lower priority over another network device. Unless you get some fancy program or firmware there is no way to evenly distribute bandwidth.
look underneath the router and where the barcode is there will be a bunch of numbers and the wep key will look something like this{984564274554}and then you put that into the ds and it should go; if not buy a nintendo wifi usb connector and it will be guaranteed to work
Best bet is to enforce the limitation by rules rather than trying to use an intermediary like a router. Kids like boundaries — even if they complain mightily.Anyway, your kids will find a way around any obstacle that you put in front of them. The best bet is that if they are caught on the internet, then they lose their computer privileges for a week.Seriously — unless you make it a moral issue, you’re just encouraging your kids to be creative in circumventing the obstacles they put on you — plus your just deluding yourself if you think a setting on a router will solve all of your problems with your kids.Finally, by blocking their access, you’re basically telling them that you don’t trust them not to use the internet when they aren’t supposed to be using it. Do you really want to send that message to them?But to answer your question, read Chapter 3 of the user manual for your router.
If you really need the extended range (not to mention increased speed), you should investigate one of their 802.11n routers.- John
It will be different for everyone in different locations with different sets of variables.But on average you should get 30 to 60 feet of connection if your not going through thick walls or have alot of RG intergernce in your area.
yea it will probly work but idk how to set it up, with mine i just read the directions and then i had wifi.
You can always reset the router to the defaults by unplugging the power cable to the router and pressing the reset button on the back of the router. Normally pressing it for about 10 seconds is all you need. Please note, you will need a thin object like a toothpick to go thru the hole to press the button. A non metal object is preferred. Note, this will lose all the user settings that were programed. After you do this, the default password “admin” will work. This is the default password. Note, you can access the user manual online at the linksys website.
You probably have to set everything up now that you have a new router.In the address bar at the top of your computer screen type in>192.168.1.1then hit enter. A pop up window will appear. In the password section type in>admin then hit enter. There you can change what you need.http://rds.yahoo.com/_ylt=A0geu6OiblhJjJgA07JXNyoA;_ylu=X3oDMTE0NmNtdmlhBHNlYwNzcgRwb3MDMTIEY29sbwNhYzIEdnRpZANTUzAxXzExMQ–/SIG=12mn8sgbu/EXP=1230618658/**http%3a//www.best-home-networking-solutions.com/linksys-routers.html
Sounds like you need to enable port triggering. To do this, do the following:1. Access the Linksys WRT54G2’s web admin interface. This can be accessed by browsing to http://192.168.1.1 , when it prompts you type in a blank username and put in the password admin. 2. Now that you are in the admin interface, click on Applications & Gaming, then click on Port Triggering3. At this point, you’ll need to know a little bit about the game you are playing. Firstly, type in the name of the game into the Application field. You will then need to type in the start port of the game and the end port of the game. If you have the game’s manual, you should be able to get it out of this. However, if you don’t there is a very good list that can be found at http://www.portforward.com/cports.htm Make sure you save and apply the settings.